Motorcycle and Bike News Web

Sealed batteries are known as maintenance free batteries. They are made with vents that (usually) cannot be removed. A standard auto or marine maintenance free battery is sealed, but not fully leak proof. Sealed batteries are not totally sealed since all batteries must allow gas to vent during charging. There are sealed lead acid (SLA) batteries that are non-spillable. Please information on our SLA batteries, see AGM and Gel batteries below.

Fuson Motorcycle Spare Parts 
www.motorcycle-battery.cn
MSN: fshys@hotmail.com

“A battery, can be any device that stores energy for later use. The word battery, is limited to an electrochemical device that converts chemical energy into electricity, by use of a galvanic cell. A galvanic cell is a fairly simple device consisting of two electrodes (an anode and a cathode) and an electrolyte solution. Batteries consist of one or more galvanic cells. ”

“A battery is an electrical storage device. Batteries do not make electricity, they store it. As chemicals in the battery change, electrical energy is stored or released. In rechargeable batteries this process can be repeated many times. Batteries are not 100% efficient - some energy is lost as heat and chemical reactions when charging and discharging. If you use 1000 watts from a battery, it might take 1200 watts or more to fully recharge it. Slower charging and discharging rates are more efficient. A battery rated at 180 amp-hours over 6 hours might be rated at 220 AH at the 20-hour rate, and 260 AH at the 48-hour rate. Typical efficiency in a lead-acid battery is 85-95%, in alkaline and NiCad battery it is about 65%.”

Fuson: Motorcycle Spare Parts  www.motorcycle-battery.cn

• 1.Advantages of Motorcycle xenon HID light
• Xenon HID (High Intensity Discharge) lighting is a breakthrough technology in automotive and motorcycle lighting uniting a passion for performance and a commitment to safety. Its high efficiency output is the new standard for delivering a higher output of light while requiring less electricity and maintenance. 3 years warranty.
• (1).Save power: consumes only 35 watts of electricity
• (2).Longer life: run for over 2500 hours:
• (3). high intensity brightness: increase brightness by 300%
• (4).purplish white light: attractive &comfortable cool white light like sun bean(up to look) 
• 2.Ballast Specifications
• Input Voltage: 9V - 18V
• Rated Voltage: 12V
• Max. Input Current: 10A
• Rated Current: 3.5A–4.5A
• Output Wattage: 35W–50W
• Igniter: Built-in
• 3.Available in: H1, H3, H4, H7, H8, H10, H11, H13, 9003, 9004, 9005, 9006, 9007, 9008
• Colors available: 4300K, 6000K, 8000K, 10000K, 12000K
  
• Luminous Flux?The total quantity of light which be sent out secondly by light source, to say briefly is Luminous Flux. Unite: Lumen(lm)

• Illumination: The incidence of luminous flux in unit’s area, that is the value of luminous flux divided by area. The illumination can be divided into horizontal and vertical illumination. Horizontal illumination is the horizontal incidence of the luminous flux, and the vertical illumination is the vertical incidence of the luminous flux.

• Light intensity: sign: I, unite: cd, instruction: The luminous body radiates the luminous flux in the solid angle of specific direction.

• Luminance: sign: L, unite: cd/m2, instruction: Luminous body radiates luminous flux in unit’s area of solid angle of specific direction.

• Luminous effect: unite: lm/w, instruction: The electric light source turns the electric energy into light ability, show with the sent out luminous flux divided by power consumption.

• Life Expectancy: unite: hour, instruction: The hour number when 50% of the quantity is damaged of a batch of bulbs.

• Economic Life: unite: hour, instruction: The comprehensive light beam output reduces to one specific hour number when under considering the damage of the bulb and the decaying state of the light beam export. It is 70% when this proportion is used in the indoor light source, and 80% in the outdoor, such as fluorescent lamp.

• Color Temperature: Show with absolute temperature K., heat namely one standard boldface, the color change gradually when the temperature rise to a certain degree, from crimson to pale red to orange to white and to blue. When some light source is the same as the color of the boldface, we call that absolute temperature the color temperature of this light source. Two light source which have same color temperature may differ in the appearance, as the correlated color temperature is opinion score for light source when the boldface radiation close to it, it is not a kind of accurate color temperature. Only color temperature unable to understand the ability of coloring in the object of light source, or how the color reproduction under this light source.

Fuson: Motorcycle Spare Parts